2222 Queen Street Bellingham, WA 98229-4753
Ph: 360.756.2411 Toll Free: 888.722.5240 Fax: 360.756.2414
www.heininger.biz Email: sales@heininger.biz
Version 090114
Assembly Instructions for
Advantage tiltAWAY
Unpack all components in the box. Refer to the component list (see diagram for
component list). Make sure all parts are enclosed. If any components are missing, please
Component List-
8 Saddle Straps
3 Bridge Pins
2 Hex Keys
1 Hitch Bolt with lock washer and
flat washer
1 Pivot Bolt with 2 washers and 1
nut
1 Clevis Pins attached to the foot
on the rack
1 Clevis Pins attached to the arms
on the rack
Assembling Your tiltAWAY¨ Bike Carrier
(Most of that is done for you)
For a 2” receiver leave the (Black) Aluminum sleeve on the foot.
For a 1.25” receiver remove the (Black Aluminum sleeve from the foot by using
the included hex keys.
Once you have
determined
which size hitch
you have, you
will need to
attach the foot (receiver insert of the bike rack) to the
upright. Slide a washer onto the pivot bolt then slide it
through the foot and upright. Put on the second
washer and then secure the nut tightly. Adjust the
bike carrier upright to be perpendicular with the foot and insert the Clevis Pin in hole
above the lower bolt. Once the Pivot Bolt is completely inserted, secure it with the
bridge pin. As seen in the image here. Raise the arms of the bike rack to a 90 degree
angle with the upright and insert the attached Clevis pin into the hole, secure it with the
bridge pin.
Comentários a estes Manuais